reference circuit
英 [ˈrefrəns ˈsɜːkɪt]
美 [ˈrefrəns ˈsɜːrkɪt]
网络 基准电路; 参考电路
双语例句
- Design and Research of the Reference Circuit in Magnetic Card Decoder Chip
磁卡解码芯片中基准电路的设计研究 - Generally, the harmonic phase reference circuit is a comb generator in frequency domain and a pulse generator in time domain.
谐波相位参考在频域上为梳状波而在时域上为很窄的脉冲序列。 - Design of a High Precision CMOS Bandgap Reference Circuit
一种高精度CMOS带隙基准电路的设计 - A novel super performance CMOS voltage reference circuit was designed based on the theory of bandgap voltage reference.
介绍了带隙基准电压源的基本原理，设计了一种高精度带隙基准电压源电路。 - A CMOS voltage reference circuit operate under sub-threshold state has been presented in this paper and analysising the limitation of MOSFET when it works in sub-threshold condition.
为了有效降低模拟集成电路的功耗，提高工艺兼容性，文中提出了一种全CMOS结构的低电压、低功耗基准电压源的设计方法。 - A bandgap reference circuit with the nominal reference voltage adjusted accurately
一种中心值精确可调的高性能带隙基准电压源 - A Novel Ultra Low Noise CMOS Voltage Reference Circuit with Digital Calibration Scheme
一种新型带数字校准的超低噪声CMOS参考电压源 - Adopt combination of the figures, Character and test data together, introduce the mechanism, explain how the disturbance voltage and disturbance power from electrical hair drier, and give the reference circuit about restraining the disturbance.
采用图形、文字和测试数据相结合的方式，介绍电吹风骚扰电压和骚扰功率的产生机理，并给出了抑制骚扰的参考电路。 - Chapter six designs the band-gap reference circuit.
第六章介绍了本芯片内置的基准电压源的设计； - The traditional bandgap reference circuit was improved in the design, which includes the applying of self-bias structure and cascode structure. By using the improvement method, we obtained low power consumption, high linear and high PSRR PTAT current generator, which in a simple circuit structure.
并对传统带隙基准电路进行了改进，采用自偏置结构和共源共栅电流镜结构，用最简单的电路形式获得了低功耗、高线性度和高电源抑制比的PTAT电流产生电路。 - A high-accuracy band-gap voltage reference circuit using trimming meets the critical voltage requirement of Li-Ion batteries.
设计带修调的高精度带隙电压基准，满足锂离子电池对充电电压的严格要求； - On the base of the conventional bandgap reference circuit, this circuit is added an operation amplifier.
该电路在传统带隙基准电路的基础上增加了一个运算放大器。 - This paper proposes a CMOS bandgap reference circuit, which can successfully work with 1 V supply voltage.
设计了一种可以工作在1V电源电压下的CMOS带隙基准。 - In this paper, we studied on critical current mode active Power Factor Correction technology, and did a detailed analysis and design on voltage reference circuit and analog multiplier circuit.
本文研究了有源功率因数校正技术中的临界导通模式的基本原理，并对其中的电压基准源和模拟乘法器做了详细的分析和设计。 - A bandgap voltage reference circuit with good stability and high accuracy is designed in this pa-per.
设计了一种具有良好稳定性和高精度的带隙基准电压源电路。 - This circuit not only improves the precision and stability of traditional reference circuit, but also has high current driving ability.
该电路不仅极大地提高了传统基准电路的精度和稳定性，而且具有较大的电流驱动能力，可应用于双模式有源功率因数校正电路。 - A 1V operational amplifier ( OPA) with rail-to-rail input signal swing is also applied in the reference circuit.
基准源电路中运用了rail-to-rail运算放大器（OPA）。 - For low voltage and high precision applications, a standard CMOS low voltage band-gap reference circuit is introduced in this paper. Using second curvature compensation, this circuit makes the output voltage reach a lower temperature range.
设计了一种标准CMOS工艺下的低电压带隙基准电路，该电路使用了温度的二阶曲率补偿技术，使输出电压达到了较低的温度系数。 - Voltage reference circuit is used to supply invariable voltage.
基准电压电路，用于提供不变的基准电压； - A low voltage current mode bandgap voltage reference circuit with a novel start-up circuit is designed.
介绍了一种低压电流模带隙电压基准电路，并提出了一种新颖的启动电路结构。 - A novel high voltage reference circuit with startup hysteresis and high current driving ability is presented in this paper.
设计了一种具有大电流驱动能力的新型带启动迟滞的高压基准电路。 - Design a bandgap voltage reference circuit and a voltage-modifying circuit to provide precise voltage and current reference for the referred ADC.
设计了基准电压源和电压微调电路，为ADC提供参考电压和电流，而且能进行一定范围内的微调。 - This essay introduced a design of band gap voltage reference circuit in DC/ DC PWM.
本文讨论了一种面向DC/DC脉宽调制器（PWM）的能隙基准电压电路，电路采用两级高增益运放的结构。 - The acquisition system is composed of pre-processing circuit, voltage reference circuit, clock circuit and standard voltage circuit.
采集系统由输入预处理电路、电压参考电路、时钟电路和基准电压电路构成。 - A CMOS band-gap reference circuit with first-order temperature compensation is presented.
阐述了一种采用了一阶温度补偿技术设计的CMOS带隙基准电压源电路。 - In this paper, a bandgap Reference circuit with the exponential curvature temperature compensation technology has been introduced.
文章介绍了一种利用Bipolar管的电流增益随温度呈指数型变化的规律，对带隙基准进行温度补偿的指数型温度补偿技术。 - Reference circuit is a vital basic module in the analog IC design, and it includes voltage and current reference.
基准电路是模拟电路设计中的一个关键的基本模块，它包括基准电压源和基准电流源。 - In reference circuit design, a two-transistor bandgap reference with negative feedback and start-up circuit is introduced. This reference has high voltage and low temperature coefficient.
在基准电压产生电路的设计中，分析了一种带负反馈和启动电路的双极型两管能隙基准源电路，具有高基准电压值和低温度系数。 - Then each module of the chip is analyzed and designed, in which several important modules including the regulator circuit, the reference circuit, error amplifier, oscillator, current control module, PWM comparator, dead-time control circuit, slope compensation and protection circuit.
然后对芯片的各个模块进行了分析和设计，其中几个重要的模块包括稳压电路，基准电路，误差放大器，振荡器，电流采样模块，比较器、死区时间控制电路、斜坡补偿和保护电路等。 - This paper study and design some circuits which is fit for the system such as fixed current circuit, voltage reference circuit and so on.
硬件电路的设计上研究了适用于本系统的恒流源电路、电压基准电路等。